| Catalog is out!!!.
Email to get on the list
We will be adding new items to this page. So keep checking. Please call
if you are looking for specific parts. We have tons of used hardware and
also new restoration supplies.
Lucas
Fuel Treatment
A powerful blend of oils and additives that contain no SOLVENTS. Designed
to increase power and fuel mileage and also lower exhaust emissions through
a more complete combustion.
Highly recomend this additive,unlike most others it really does work!
I have been using Lucas for years in my engines. From the flat head 6
cylinders to the 300hp Catapillar.
It is a fantastic additive that replaces lead in Gasoline that lubricates
when burned.
Lucas Fuel Treatment is formulated for both gasoline and diesel engines,
carbureted or fuel injected. It gives your fuel system what it really
needs - a blend of super slick oils and additives with a high detergent
action that allows the engine to operate at maximum efficiency. Also,
it cleans and lubricates the carburetor and injectors and causes the fuel
to burn more thoroughly for increased power and less fuel consumption.
Lucas Fuel Treatment should definitely be used in vehicles that require
leaded fuel because it actually replaces the benefits of lead in gasoline
without causing harmful emissions. Use it to pass smog tests.
Directions
Pour Lucas Fuel Treatment directly into fuel tank.
Recommended dosage is 2-3 ounces of Fuel Treatment per 10 gallons of
fuel.
Exceeding the recommended dosage is not harmful to your vehicle.
Key Benefits
•A great tune-up in a bottle
•Cleans and lubricates the fuel system
•Neutralizes low sulfur fuel problems
•Increases power and miles per gallon by burning excess exhaust
emissions
•Increases the life of pumps and injectors
$5.99 / Bottle
Windshield
Lock downs
1939 to1942 custom runabouts
1946 to 1949 customs
Parts also sold separately.
Chrome plated bronze.
Highest Quality reproductions that are exact copies. 100% satisfaction
Guaranteed
Complete plated $485.00
Non plated $385.00
Screw $75.00
Each tier $125.00
Base $285.00
Cap $45.00
Garwood
& Dodge V fold lock downs
2 1/2 inches long
1930-35 21', 25', and 28' Dodge Runabouts
1932-37 Garwood Runabouts
$190.00 chrome plated bronze
Limited qualities
Brass
nut that holds the water jacket pipe into the exaust elbow.
$30.00
We are the only ones carring this nut. Will fit your old elbow and new
elbows.
We also carry New Cast Bronze Elbows.
Call for prices. and #' you need
Johnson
Cartridge pump
Features: Motor-impeller cartridge easily removed for cleaning, no tools
required
Type: Cartridge bilge pump with attached electronic switch
Dimensions: 4-1/4"H x 3"W x 4"L
Port Size: 3/4"
Built-In Switch: Yes, sealed, electronic switch
Material: Thermoplastic body, 316 stainless-steel shaft
Warranty: Three years
1000gph
They will run on 6 volt efficiently
JPbilge $98.99
New
K series and M series Gasket sets including head gasket. Each
set covers ALL series engines.
A & B gasket set $265.00
K gasket set $ 265.00
M gasket set $295.00
Replacement
Water pump impeller for Chris Craft K series engines with Sherwood
water pumps. We also have other water pump impellers contact me for yours.
$66.20
We also have used and new water pumps available for K series and M series
engines.
Chris
Craft engine enamel. for use on K & M series engines
$10.95 / 12 oz can
Chris
Craft Step pads
Lg prewar 5X11 CC algonac $25
Post war white CC 2.5x7 3/4 (1954) $16
Post war Black CC 2.5x7 3/4 (1954) $16
White Ribbed 2.5x7 3/4 (31-54) $16
Black ribbed 2.5x7 3/4 (34-54) $16
Chris
Craft Script Logos new complete with star and srcews. We also have used
logos call me!!
9 inch $40.00
15 inch $50.00
26 inch $70.00
Champion
Spark plugs for K & M series engines
J8c $2.99 each high temp
J6c $ 2.99 each medium temp
Spark
plug wire sets K & M series, in 7mm braided cloth. Perfect
finishing touch to your engine. Rubber boots on the ends. $60.00 / complete
set
Complete
Cloth harnes for Chris Craft and other boats. Includes new cloth wire
encased in Black cloth wire loom. corect for Chris Craft.
5 14 gauge cloth wire marine grade
2 10 gauge cloth wire marine grade
7 feet long $250.00
We can build these to your specs. Call to find out more.
Correct
replacement Ignition switch with correct bezel to replace Chris
Craft original switch. Switch is Off / On to be used with starter button.
Bezel diameter 1 5/16
$110.00 Switch and bezel . Off/On
$115.00 Switch and bezel Off /On/Start
$75.00 Bezel only.
Chris
Craft Coat Rack.
Made of 1/8" Steel Painted Chris Craft Blue.
34 1/4" long 6" tall 4" deep hooks. Each hook can support
25 pounds!!
Pre drilled screw holes.
This would be a great addition to Shop , Lake home , Cabin or hey even
the office.
$60.00
Chris
Craft Continental Stern Poles
You stain and varnish. Made of Sitka Spruce.
$285.00 Pole only Light Fixtures available
Chris
Craft Sedan Stern Poles
16" long. Made of Sitka Spruce
$150.00 You stain and Varnish Fixture not included.
Old fixtures and new will fit.
NEW!
Sitka Spruce Chris Craft Capri pole. You
stain and varnish,Comes with new wiring, new single pin contact.
1 1/4" pole top. Light fixture sold sepparately. 35.5"
overall. Length is without light
$285.00
New!
Mahogany Custom runabout Stern pole. You stain
and varnish, Comes with new wiring, new single pin contact. 1
1/4" pole top.Light fixture sold sepparately. 35.5"
overall. Length is without light $285.00
New
replacement glass globes.
Prewar Beehive $35.00
post war glass will fit new capri fixture and old Chris Craft poles $35.00
New!
Mahogany Stern poles 7/8" top. You stain and varnish
30" $131.00
32" $131.00
36" comming soon
40" comming soon
Length is without light
New
Chrome Bronze Light Fixtures.
Will fit New and older Continetal, Custom, Capri, Sedan Stern Poles 1
1/4" base
$180.00 Fixture only
Replacement Rings $45.00
Replacement $35.00
New
Chrome Bronze Light Fixtures.
Will fit New Stern poles and any other 7/8" top.
$150.00 Fixture only
Replacement Rings $45.00
Replacement $35.00
Post
war Red nylon ranked or straight pennant (runabouts & utilities) $35.00
Postwar Blue nylon ranked or straight pennant (cruisers) $35.00
Prewar nylon 12x18 $40.00
New
replacement stern pole base contacts. For original Chris Craft sternpoles.
$15.00
NEW
Replacement Chris Craft Tach Cables. Available in 10, 12, 14,
16 foot lenths
10' $130.00
12' $155.00
14' $185.00
16' $210.00
New
20' Stainless Steel Choke Cable with embossed "C" on
a Chrome plated knob. Cut to desired lenth
$85.95
Convert
over to electronics with Pertronix. Two wire conversion Fast
and easy.
IGW 4149 $125.00
IAY 4009 $115.00
NEW AC Chris Craft Fuel Pump, Fits models B,K,KL,KBL,KFL,KLC,M,MB,ML,MBL
All Chris Craft 4 and 6 cylinder engines.
FP7241 $150.00 (Shown) Core Charge $70.00 must include glass bowl. (Straight
housing)
FP4404 $150.00 Core Charge $90.00 must include glass bowl. (90 degree
housing)
Rebuild Kits for FP7241, 4404, GrayMarine and Chrysler $65.00
283 fuel Pump $170.00 Core $70.00
327 Fuel Pump Call for pricing
Replacement
Dash light socket, Standard replacement for Chris Craft dash
lights.
Socket $ 5.99
Bulb 12 volt $1.99
Bulb 6 volt $2.05
Chris
Craft Engine Mounts
3-3/4X 3-1/4 Mounting holes 2-1/4 OC fits B,K,KL,KBL,KFL,KLC 430/431
rear mount, M & W with reduction drive as rear mounts, fits some Chrysler.
$65.00
4-1/2 X 4 Mounting holes 2- 5/8 OC fits M,MB,ML,MBL, MCL,W $73.00
Chris
Craft Starter switch with stepped bezel. Bezel is marine grade
and polished to mirror finish. Original to Chris Craft boats pre and post
war.
Starter switch with stepped bezel $ 56.00
Without bezel $21.00
Replacement
Chris Craft and others Push Pull switch. Marine grade Cole Hersee
Switch. Off / ON 6 to 36 volt systems, Chrome plated brass knob
$15.50
Chris
Craft Starter Rebuilt 6 or 12 volt Fits K and M series engines.
Starter $240.00
Core charge $75.00
Chris
Craft Generators REBUILT 12 volt. One wire regulator
12 volt Gen $415.00
Replacement pulley $78.00
Generator Core charge. $75.00
Windshield
deck Gasket Rubber, UV protected rubber, Seals bottom edge of windshield
to deck. $2.80 / foot
Windshield
glass gasket, soft rubber used to bed windshield glass in brackets. $2.00
/ foot
Horn
Ring Isolator, this UV protected foam isolator inserts under the horn
ring pictured. (Chris Craft two spoke deluxe wheel. ) This isolator is
needed for your horn to work properly.
New
Gas cap chains. Correct for all Chris Craft boats. 18" long made
of brass. Cap is not included
$8.50
1-1/2
inch closed cell crash pad foam. 6' lengths. $3.00 / foot
Fuller
Counter sink and bung cutter set
Mahogany case with 5 counter sinks, tapered bits , and stop collars. 6,8,10,12
and 14. two bung cutter 3/8" and 1/2"
$105.00
Sierra Fuel filter and water Separator
Combo Pack Inline fuel filter and water separator, Removes dirt and fuel
tank rust from your fuel. Easy filter change out when dirty. includes
aluminum bracket, Easily concealable mounts to stringer or bulk head.
Combo Pack $38.00
Replacement filter $10.00
We have literally have thousands
of parts on site. We are the Largest Antique and Classic boat part supply
in the midwest.
Way too many to list. Please call
with your needs 651-248-7314 9 to 5 Central or email
Joel Lemanski
Warranty and Returns
All items must be returned within 30 days of shipment. All returns are
subject to 15% restocking fee. Rebuilds are covered for 30 days after
shipment. Manufacture warranty is valid and must be returned to manufacturer.
Special orders, Plating of parts, Used Parts, & Cut Items are not
returnable.
|